Updated 10-APR-1997
How to adjust the QXR fast pulse waveform
This should normally NOT be necessay.
After a re-boot, (not a reset) the waveform MAY need to be loaded from
the disk file. (the default waveform is a linear sawtooth)
On Page S6 or W38 (PA1589) Click on the option -->
This is how the present waveform appears.
Click on the graphic switch "Get f1" to get the saved file data, and
then (after flat top and before the next spill) click on the graphic
switch "Send". A requestor box will appear on the PA screen. Click on "OK"
There is only one file.
Use W82 (PA1629) to view the fast beam shape
Select "Plot Options" and "Intensities" so the image looks like this:
Fast beam pulse width should be about 5 milliseconds wide.
Here's how they should look. (April '97)
(June '97)
